SunFIRE™ is a resilient LED light, designed for “fit and forget” (FAF) applications and minimising or negating continuous, ongoing maintenance. SunFIRE™ is available in a variety of high flux LED power outputs ranging between 6w – 118watts. Utilising an advanced angled design and high flux LEDs the SunFIRE™ provides up to 93% more light capacity than the traditional lights requiring a higher power input

SunFIRE™ lights lend themselves to running independently from the power grid as they can be powered by solar / small wind turbines or any combination. Due to the technical intelligence of the light additional power savings can be achieved with the inbuilt light sensor allowing for  automatic increase or decreasing of the light output power depending on the ambient light level, additional savings can be made by achieved by scheduling various power reductions during the night by programming power reduction as required.

The colour rendition of SunFIRE™ achieves extremely high light output lux levels with a low input power. This allows a solar solution to be offered utilising much smaller solar panels and back up batteries than with traditional lighting thus reducing the cost. Additional savings are made because the SunFIRE™ has dynamic power control. SunFIRE™ will automatically modulate it’s light output in response to the ambient light level which can help to save a further 10 – 15% by only providing the necessary light required at the right time, further savings can be achieved by setting the scheduling to dim the light at times of low vehicle or pedestrian traffic at night which could add a further 20% saving.  By gradually increasing the light output depending on the ambient light level additionally allows drivers and people to adjust their eyes to the darkness as well.

Unlike traditional sodium lights which have a very high initial power demand at switch on, SunFIRE™ employs a soft-start feature. SunFIRE’s™ initial start up current is only 25% of the total running power, thereby helping to reduce installation costs by reducing cable and circuit breaker size requirements when used in a mains power application. Download SunFIRE document. (299KB)
 

The SunFIRE™ meets S3, S4, S5, ME4, ME3 & ME2 standards.

SunFIRE 7 - 77watts deployed in Mexico

SunFIRE 7 - 77watts replacing the 150watt HPS lights in Guadalajara, Mexico - a 49% saving on power consumption for the Municipality!!!!

We are happy to advise you on the suitability of SunFire™ for any application.  We may be able to suggest alternative solutions so it is always worth discussing your proposal with us.

Typical applications for this light are:

• A Class roads
• B class roads
• Residential streets
• Main roads,
• Highways
• Roundabouts
• Junctions
• Perimeter security fencing
• Airports
• Car parking
• Area lighting
• Shopping areas
• Pedestrian walkways
• Marinas

SunFIRE LED Lights on our production line