Low Energy Designs

SunFLOWER

SunFLOWER uses high luminous fluxLEDs on high quality modular boards and in conjunction with our unique software controlled LED temperature monitoring and control system, this ensures maximum lamp life. It has the ability to set the maximum temperature on the LEDs allowing the customer to maximise and control the life of the product. Designed for fit and forget (FAF) applications to limit continuous maintenance.

The SunFLOWER is a modular light that can be used in many applications. It is an extremely bright light with relatively low power consumption.

SunFLOWER has dynamic power control. This enables the unit to automatically modulate light output in response to ambient light levels (with potential additional energy savings). Using a PIR motion sensor enables dimming of the light during periods of low traffic. This can be programmed to send light activation to a single light or to a whole group of area lights.

SunFLOWER products can be manufactured to customer specification in order to provide a spectrum of desired colour rendering index (Ra) and colour temperature (K). This means that RGBW (High intensity Red, Green and Blue) LED modules can replace some of the white modules to allow for a fully programmable colour changing light. The light can then offer unlimited colour output but can also change as necessary to the intense bright white light when required. The change of colour can be manual or automatic and can activated by either the onboard schedules or a movement sensor.

Standard Functions & Features.

  • Fully automatic light-adjusting dusk-to-dawn sensor (the light either increases or decreases brightness automatically fully programmable).
  • Various lens options available to suit different light distribution requirements.
  • LED automatic temperature control (using our innovative P-N junction temperature control).
  • PIR movement light activation.
  • Remote luminaire alarms and ancillary functions (e.g. road temperature sensing, vibration sensing, intruder detection).
  • A range of light schedules can be programmed facilitating various power saving modes.
  • Additional features include remote power output control, monitoring, LED max/min temperature setting, scheduling on/off times, fault reporting, 100% dimming from any output power, ramping power timer and system diagnostics.
  • Additional features include remote power output control, monitoring, LED max/min temperature setting, scheduling on/off times, fault reporting, 100% dimming from any output power, ramping power timer and system diagnostics.
  • Colour rendering index on our standard package of Ra ≥ 75 of standard daylight spectrum.
  • Wireless control of the light modules facilitates 100% customisation of lights.
[SunFLOWER]
Specifications
Product CodeSBF8 (96W)
SBF10 (120W)
SBF12 (144W)
SBF16 (192W)
SBF20 (240W)
Available in AC Power (A) or
DC Power (D) options
Supply Voltage20 - 28VDC (low voltage),
90 - 264VAC
Power RatingProgrammable range between 10 - 240 Watts
Lumen LevelAverage lumens:
5,280 13,688 Photopic or
11,95330,989 Scotopic
Operating
Temperature		-10oC to +70oC Ambient (-30oC with ramp set)
Circuitry
Operating
Temperature		LEDs 150oC Maximum Tj (Junction Temperature)
Controller board circuitry 105oC Maximum
Typical operating conditions at full power, Tj = 80oC
Humidity0 - 99%
Ingress Classification IP66
Body MaterialHigh grade LM20 Cast Aluminium
Lens Material Polycarbonate graded at ISO 178
Lens Light
Transmission		Luminous Transmittance 88%
Light CoolingConvection & Software Temperature Controlled
Colour Appearance &
Rendering		2,700K 10,000K range
(Warm white, cool white or
RGB (Red Green Blue))
Typical 5,000K 6,500K
offering Ra=75 (CRI=75%)
Luminaire LifetimeApprox. 50,000hrs.
When operated at a Tj of below 63/80oC then 50,000 - 100,000 hours to reach 70% of original light output (not to failure)
Photocell &
Movement Sensor		PV sensor built in, providing a variable light output depending on ambient light level.
Programmable settings can be used in conjunction with PIR sensor.
Compliance CE, RoHS,
BS EN 60598-2-3:2003,
BS EN 60598-1:2004
Finish Powder coated finish in matt black or custom colour upon request
DimensionsH 55mm x W 667mm x D 667mm
MountingWall or ceiling mount allowing 360rotation of the LED module
Weight7.1 Kg
ProductionMade in United Kingdom (Wales)
Right click to download SunFLOWER document (216 KB)
Get Adobe Reader
Get IESViewer

"Energy Efficiency Loans from the Carbon Trust are a cost effective way to replace or upgrade your existing equipment with a more energy efficient version. This means an immediate benefit from carbon, energy and cost savings. Low Energy Designs Limited can provide details of Carbon Trust interest-free loans and assist you in completing your application."

[StatCounter]